Prestige Beckington Curve Driveway Gate

Made in Britain logoA substantial hardwood driveway gate with an elegant concave curved top and vertical pales



The Prestige Beckington Curve Driveway Gate is an substantial made to measure driveway gate with an elegant curved top and vertical pales. The gate has a range of superior features including 66mx 145mm section size, 18mm screwed and plugged tongue & groove, precision mortice & tenon joints and a 200mm heavy duty rail. The gates also have a range of weather features such as drip grooves, angled braces and rails designed to ensure water runs off the gate with ease.

Available in Iroko or Oak hardwood for automation, the Prestige Beckington Curve Driveway Gate has a smooth planed finish and a radius on all edges giving it a high quality finish.

These gates made to order gates are proudly Made in Britain.

Download a copy of our easy quote form HERE and take to your nearest stockist

  • Wood type: Iroko or Oak hardwood.

  • Finish: Supplied untreated ready for treatment (click here for details)

  • Gate width: From 4′ (1.22m) up to 9ft (4.27m)

  • Gate Height: From 4′ (1.22m) high up to 8′ (2.44m) high

  • Installation: Please consult a qualified installer when installing automated gates

  • Stile Tops: A choice of stile top are available

    Choice of gate stile tops








Additional information


Iroko Hardwood made to order


As the width of a gate increase there will be a minimum height restriction to ensure that gate integrity is maintained. This allows the bracing to fully support the gate, The number of diagonal braces will vary depending on the size of the gate


Gates must be hung with the bracing raising up from the bottom of the stile, See for more details, These are heavy gates and are not suitable for manual operation


For underground automation only


Joinery grade Iroko sourced in line with EU Timber Regulation

Water Run-off features

This gate encorporates features that aid the run off of water helping to protect the gate


Ideally should be stored flat on level bearers. Can be stored upright against a wall (must not be uneven) with both sides evenly supported but preferably, not for too long, Until gates are installed they should be handled carefully. Do not drag across each other or across surfaces.

Please note

Gates cannot be left exposed to the elements until fully treated, These gates have been produced at 16% moisture content and need to be kept dry. Avoid direct contact withsunlight until the gate has been fully treated

You may also like…

Go to Top