Beckington Driveway Gate

Made in Britain logoOne of Charltons most popular gates. Tongue & groove match boarding with vertical pales to see through whilst still offering security.

Details below.

 

Description

The Beckington driveway gate is one of Charltons most popular made to measure gates. This attractive gate has tongue & groove match boarding as well as vertical pales to see through. However, the gate still offers security. This gate is also available with a flat top.

Modern technology, as well as traditional joinery skills, is used to create a quality made to measure gate. The gate has strong mortice & tenon construction and a planed finish. Additionally, the Beckington has a heavy duty bottom rail as standard. The life of the gate are extended with water run off features. These features encourage the water to run off as well as impeding water ingress. It also benefits from a planed finish and choice of stile tops. The gates are also supplied treated with two coats of preservative. All gates must be treated with a Modern UV wood oil prior to installation.

Made in Britain, the Beckington driveway gate is manufactured using sustainable slow grown softwood.  Slow grown softwood is more dense and as a result produces a better quality wood. Therefore, a more durable gate. Hardwood is ethically sourced joinery grade Iroko. 

Download our Easy Quote Form here and take to your nearest stockist.

  • Wood Type: Iroko and Softwood (click here for details)

  • Finish: Supplied untreated ready for treatment (click here for details)

  • Widths: From 2’6” (0.762m) up to 9′ (2.74m) per gate. *Please note gates under 4′ wide will automatically have a flat top.

  • Heights: Up to 8′ (2.44m) per gate.

  • Automation: Ready for automation with a heavy duty rail as standard (please consult a qualified installer)

  • Recommended Fittings: 30″ two way adjustable hinges + Ring Latch + Drop bolt & socket set (both gates if a pair). Hinges should be a minimum of a  third of the width of the gate.

  • Recommended Posts: Click here for posts sizes

  • Stile Tops: Choice of stile tops are available.

    Weathered stile top

    Weathered

    Sculptured stile top

    Sculptured

    Rounded stile top

    Rounded

    Pointed stile top

    Pointed

     

     

     

  • Rebate: Closing edge of gate can be rebated.

    gate rebate

     

     

     

     

 

 

Additional information

Availability

All sizes made to order

Special widths

Available to order

Special heights

Available to order

Hanging

Gates must be hung with the bracing raising up from the bottom of the stile

Bracing

As the width of a gate increase there will be a minimum height restriction to ensure that gate integrity is maintained. This allows the bracing to fully support the gate.

Softwood

Joinery grade PEFC certified sustainable timber

Hardwood

Joinery grade Iroko sourced in line with EU Timber Regulation

Manufacture

Made In Britain

Storage

Ideally should be stored flat on level bearers. Can be stored upright against a wall (must not be uneven) with both stiles evenly supported but preferably, not for too long., Until gates are installed they should be handled carefully. Do not drag across each other or across surfaces.

Please note

Gates cannot be left exposed to the elements until fully treated, These gates have been produced at 16% moisture content and need to be kept dry. Avoid direct contact withsunlight until the gate has been fully treated

You may also like…

Title

Go to Top