A substantial quality driveway gate with tongue & groove match boarding, flat top and vertical pales
Prestige Beckington Flat Top Driveway Gate
Description
The Prestige Beckington Flat Top driveway gate is an substantial made to measure driveway gate with vertical pales. The gate has a range of superior features including 66mm x 145mm section size, 18mm screwed and plugged tongue & groove, precision mortice & tenon joints and a 200mm heavy duty rail. The gates also have a range of weather features such as drip grooves, angled braces and rails designed to ensure water runs off the gate with ease.
Available in Iroko or Oak hardwood for automation, the Prestige Beckington Flat Top driveway gate has a smooth planed finish and a radius on all edges giving it a high quality finish.
These made to order gates are proudly Made in Britain. Download a copy of our easy quote form HERE and take to your nearest stockist.
Need advice or a local stockist? Call our friendly & knowledgeable Sales Specialists on 01373 812521 or email us at sales@charltonsgroup.co.uk
Wood type: Iroko or Oak hardwood
- Finish: Supplied untreated ready for treatment (click HERE for details).
- Gate width: From 3′ (0.915m) up to 9ft (2.74m)
- Gate Height: From 3′ (0.915m) high up to 8′ (2.44m) high
- Installation: Please consult a qualified installer when installing automated gates. (Click HERE for more information).
- Stile Tops: A choice of stile top are available
Additional information
| Availability | All sizes made to order |
|---|---|
| Bracing | As the width of a gate increase there will be a minimum height restriction to ensure that gate integrity is maintained. This allows the bracing to fully support the gate, The number of diagonal braces will vary depending on the size of the gate |
| Hanging | Gates must be hung with the bracing raising up from the bottom of the stile, See https://charltonsgates.com/hanging-gates/ for more details, These are heavy gates and are not suitable for manual operation |
| Automation | For underground automation only |
| Hardwood | Joinery grade Iroko sourced in line with EU Timber Regulation, Joinery grade PEFC Certified Oak |
| Water Run-off features | This gate encorporates features that aid the run off of water helping to protect the gate |
| Storage | Ideally should be stored flat on level bearers. Can be stored upright against a wall (must not be uneven) with both sides evenly supported but preferably, not for too long, Until gates are installed they should be handled carefully. Do not drag across each other or across surfaces. |
| Please note | Gates cannot be left exposed to the elements until fully treated, These hardwood gates are produced at 16% moisture content and need to be kept dry. Avoid direct contact withsunlight until the gate has been fully treated |
| Recommended Treatment | Modern UV oil for planed timber – please refer to our Treatment Instructions |
