Blenheim 5 Bar Gate

A creative twist on the classic Estate design.  The Blenheim is the most imposing  gate within our 5 bar range


The Blenheim 5 Bar entrance gate is a creative twist on the Estate gate. The design of this hardwood gate has a tapered top bar with superior hanging stile. These are joined using traditional hardwood stop dowelled mortice & tenon joints. Reinforced by an extended diagonal brace.

Made from specially selected timber resulting in a very stable hardwood gate.

The Blenheim 5 bar gate has a smooth planed finish with chamfering to the stiles, top bar and rails. It is finished with stainless steel fittings.

  • Wood Type: Iroko (click here for details)

  • Finish: Iroko supplied untreated ready for treatment (click here for details)

  • Widths: From 3′ (0.915m) to 12′ (3.66m).

  • Heights: To top of top bar 3’7” (1.09m) / 5’ 7’’ (1.702m) to top of extended stile

  • Automation: Suitable for automation with the addition a heavy duty rail (please consult a qualified installer).

  • Recommended Fittings: Adjustable Double Strap Field Gate Hinge Set (click here for sizes) + Latch + Drop Bolt (both gates if a pair). Click here for more information. Click here for more information.

  • Recommended Posts: Click here for post sizes




Additional information

Special Widths

Available to order

Special Heights

Available to order


Gates must be hung from the extend larger stile, see for more details


The number of diagonal and upright braces will vary depending on the size of the gate


Joinery grade Iroko sourced in line with EU Timber Regulation


Made using stainless steel fixings, Made In Britain


Until gates are installed they should be handled carefully. Do not drag across each other or across surfaces.
Ideally all gates should be stored under cover in an open sided building and out of direct sunlight. Should be stored flat on level bearers. Can be stored upright against a wall (must not be uneven) with both stiles evenly supported but preferably, not for too long.

Please note

Gates cannot be left exposed to the elements until fully treated, Iroko gates have been produced at 16% moisture content and need to be kept dry. Avoid direct contact withsunlight until the gate has been fully treated

You may also like…


Go to Top