Country Side Gate

Made in Britain logoA heavy duty feather edge board gate. 


The Country side gate is a heavy duty featheredge board gate. The heavy duty frame is ledged and braced with mortice & tenon joints.  4” featheredge boards. Ideal as a stand alone gate or to complement feather edge fencing.

  • Wood type: Softwood (click here for details).
  • Finish: Pressure treated (click here for details).
  • Widths: 0.762m, 0.9m, 1.067m & 1.2m (Special widths made to order 3′ (0.915m) up to 6′ (1.83m).
  • Heights: 1.778m (Special heights made to order up to from 3′ (0.915m) up to 6′ (1.83m).
  • Automation: Not suitable for automation.
  • Recommended fittings: On Wall: Cranked pin on plate + Ring latch / Between wooden posts: One way adjustable hinge set + Ring latch. Hinges should be a minimum of a  third of the width of the gate. For larger sizes use 30″ 2 way adjustable hinges. Click here for more information.
  • Recommended posts: For standard, sizes 2.4m x 100mm x 100mm(minimum requirement). For larger widths please click here for posts sizes.

Additional information


Special width & heights made to order, Standard sizes held in stock

Special Widths

Available to order

Special Heights

Available to order


Can be hung from either stile but ideally should be hung so that the bracing supports the weight of the gate on the hinges


PEFC Certified Timber


Made In Britain


Ideally should be stored flat on level bearers. Can be stored upright against a wall (must not be uneven) with both sides evenly supported but preferably, not for too long

You may also like…


Go to Top