Farrington Driveway Gate

Made in Britain logoNew to the Charltons range, The Farrington Driveway Gate is a stunning driveway gate.

Details below


New to the Charltons range, The Farrington Driveway Gate is a stunning driveway gate with an attractive open design with a part boarded lower section, allowing you to see through the gates whilst still offering security.

Made in Britain, this quality made to measure gate is created using modern technology as well as traditional joinery skills. The dramatic top
bar  is cut from one solid piece of timber for added strength. The gate has strong mortice & tenon construction and a planed finish. In order to extend the life of the gate water run off features are incorporated into the design.

The softwood Farrington Driveway gates are supplied with two coats of water based preservative. All gates must be treated with a Modern UV wood oil prior to installation

Download our Easy Quote Form here and take to your nearest stockist.

  • Wood type: Softwood and Iroko hardwood (click here for details)
  • Finish: Supplied untreated ready for treatment (click here for details). Available in a fully treated coloured oil finish. Click here for details.
  • Widths: From 4′ (1.220m up to 9′ (2.74m) per gate.
  • Heights: From 5′ (1.525m) up to 8′ (2.44m) per gate.
  • Automation: Ready for automation with a heavy duty rail as standard (please consult a qualified installer).
  • Recommended Fittings: Due to the curve of the gate a bespoke pair of hinges is recommended (should be a 1/3rd of the width of the gate) + Ring Latch + Drop Bolt & Socket Set (both gates). Click here for more information.
  • Recommended Posts: Click here for sizes.
  • Stile Tops: Choice of stile tops is available on this design.

    Weathered stile top


    Sculptured stile top


    Rounded stile top


    Pointed stile top





  • Rebate: Closing edge of gate can be rebated.

    gate rebate






Additional information


All sizes made to order

Special Widths

Available to order

Special Heights

Available to order


Gates must be hung with the bracing raising up from the bottom of the stile, This gate is not designed to be hung in field entrances


As the width of a gate increase there will be a minimum height restriction to ensure that gate integrity is maintained. This allows the bracing to fully support the gate


Joinery grade PEFC certified sustainable timber


Joinery grade Iroko sourced in line with EU Timber Regulation


Made In Britain


Ideally should be stored flat on level bearers. Can be stored upright against a wall (must not be uneven) with both stiles evenly supported but preferably, not for too long, Until gates are installed they should be handled carefully. Do not drag across each other or across surfaces.

You may also like…

Go to Top