Forester 5 Bar Gate

The Forester is a  value traditional 5 Bar gate with a universal design allowing it to be hung from either end.


The Forester 5 Bar gate is a value traditional gate with a universal design allowing it to be hung from either end.  This gate is ideal for use as a field gate or farm gate. However, the Forester  can also be used as an economical entrance gate for your property.

The Forester 5 bar gate benefits from a domed top bar, mortice & tenon joints, planed finish and stainless steel fixings. Made in Britain, The Forester 5 Bar gate is manufactured using sustainable slow grown softwood.  

  • Wood Type: Softwood (click here for details).

  • Finish: Pressure treated (click here for details).

  • Widths: From 3′ (0.915m) to 14′ (3.66m). 13′ gates are made to order.

  • Height: 3’7” (1.09m) to top of top bar / 4’ (1.219m) to top of stile

  • Automation: Not suitable for automation.

  • Recommended Fittings: Adjustable Double Strap Field Gate Hinge Set (click here for sizes) + Latch + Drop bolt & socket set (both gates if a pair). Click here for more information.

  • Recommended Posts: Click here for sizes.




Additional information


Held in stock apart from 13' (3.96m) which is a made to order size

Special widths

Not available on this design

Special Heights

Not available on this design


Can be hung from either stile, See for more details


Joinery grade PEFC certified sustainable timber


Not available in hardwood


Made In Britain


Modern UV Wood Oil


Until gates are installed they should be handled carefully. Do not drag across each other or across surfaces.
Ideally all gates should be stored under cover in an open sided building and out of direct sunlight. Should be stored flat on level bearers. Can be stored upright against a wall (must not be uneven) with both stiles evenly supported but preferably, not for too long.


The number of diagonal braces will vary depending on the size of the gate

You may also like…

Go to Top