A classic garden gate with mainly tongue & groove match boarding with vertical pales.
Hampton Garden Gate
Description
The Hampton garden gate is a classic gate with mainly tongue & groove match boarding with vertical pales. Framed, ledged and braced with mortice & tenon joints and chamfering to top and mid rails.
- Widths:0.915m, 1.067m & 1.22m * (3′, 3’6” & 4′)
- Height: 1.067m (3’6”)
- Recommended fittings:On Wall: Cranked pin on plate + Ring latch / Between posts: One way adjustable hinge + Ring latch. Hinges should be a minimum of a third of the width of the gate.
- Recommended posts: 2.1m x 100mm x 100mm (minimum requirement).
* Larger driveway sizes are also available (click here for details).
Additional information
| Availability | Standard Softwood sizes are held in stock |
|---|---|
| Special Widths | Not available to order |
| Special Heights | Not available to order |
| Hanging | Can be hung from either stile but ideally should be hung so that the bracing supports the weight of the gate on the hinges. |
| Softwood | Joinery grade PEFC certified sustainable timber |
| Manufacture | Made In Britain |
| Recommended Treatment | Modern UV Wood Oil |
| Storage | Ideally should be stored flat on level bearers. Can be stored upright against a wall (must not be uneven) with both sides evenly supported but preferably, not for too long. |
