A
prestigious entrance gate in a traditional Victorian design. With its straight top, shaped pales and grand panelling, this timeless classic will continue to retain its style.
Hilton Driveway Gate
Description
The Hilton driveway gate is a prestigious entrance gate in a traditional Victorian design. With its straight top, shaped pales and grand panelling, this timeless classic will continue to retain its style. The style of this gate also offers security for small children and pets. The gate has strong mortice & tenon joints and a planed finish.
The Hilton driveway gate incorporates water run off features which encourage the run off of water and impedes the ingress of water. These features help to extend the life of this quality gate. Made in Britain, the gates use joinery grade selected timber.
Wood type: Iroko & Softwood (click here for details)
Finish: Supplied untreated ready for treatment (click here for details).
Widths: Up to 6′ (1.83m) per gate.
Heights: Up to 8′ (2.44m) per gate.
Automation: Ready for automation with a heavy duty rail (please consult a qualified installer).
Recommended fittings: 30″ two way adjustable hinges + Ring latch + Drop bolt & socket set (both gates if a pair)
Recommended posts: Click here for post sizes.
Stile tops: Choice of stile tops are available (click here for details)
Rebate: Closing edge of gate can be rebated.
Additional information
| Availability | All sizes made to order |
|---|---|
| Special Widths | Available to order |
| Special Heights | Available to order |
| Hanging | Gates must be hung with the bracing raising up from the bottom of the stile |
| Bracing | As the width of a gate increase there will be a minimum height restriction to ensure that gate integrity is maintained. This allows the bracing to fully support the gate. |
| Softwood | Joinery grade PEFC certified sustainable timber |
| Hardwood | Joinery grade Iroko sourced in line with EU Timber Regulation |
| Manufacture | Made In Britain |
| Recommended Treatment | Modern UV Wood Oil |
| Storage | Ideally should be stored flat on level bearers. Can be stored upright against a wall (must not be uneven) with both stiles evenly supported but preferably, not for too long., Until gates are installed they should be handled carefully. Do not drag across each other or across surfaces. |
| Please note | Gates cannot be left exposed to the elements until fully treated, These gates have been produced at 16% moisture content and need to be kept dry. Avoid direct contact withsunlight until the gate has been fully treated |
