Lincoln Driveway Gate

Made in Britain logoImpressive and imposing with tongue & groove match boarding which is ideal for security and privacy.

Details below.


The Lincoln driveway gate is a wooden gate designed for security and privacy, with tongue and groove match boarding. It offers both security and privacy while also creating an attractive entrance to the property. The gate is built to last, with full mortice and tenon joints and a smooth planed finish.

Additionally, the Lincoln driveway gate includes water run off features to encourage water run off and prevent water damage, extending the life of the gate. The gate is made with joinery grade selected timber and is Made in Britain. The softwood gates are supplied with two coats of water based preservative.

Download our Easy Quote Form here and take to your nearest stockist.

  • Wood type: Iroko & Softwood (click here for details).

  • Finish: Supplied untreated ready for treatment  (click here for details). Available in a fully treated coloured oil finish. Click here for details.

  • Widths: From 3′ (0.915m) up to 9′ (2.74m) per gate.

  • Heights: From 3′ (0.915m) up to 8′ (2.44m) per gate.

  • Automation: Suitable for automation with the addition of a heavy duty rail (please consult a qualified installer).

  • Recommended Fittings: 30″ two way adjustable hinges + Ring latch + Drop bolt & socket set (both gates if a pair). Hinges should be a minimum of a  third of the width of the gate. Click here for more information.

  • Recommended Posts: Click here for post sizes

  • Stile Tops: Choice of stile tops are available.

    Weathered stile top


    Sculptured stile top


    Rounded stile top


    Pointed stile top





  • Rebate: Closing edge of gate can be rebated.

    gate rebate









Additional information


All sizes made to order

Special Widths

Available to order

Special Heights

Available to order


Gates must be hung with the bracing raising up from the bottom of the stile, This gate is not designed to be hung in field entrances


As the width of a gate increase there will be a minimum height restriction to ensure that gate integrity is maintained. This allows the bracing to fully support the gate.


Joinery grade PEFC certified sustainable timber


Joinery grade Iroko sourced in line with EU Timber Regulation


Made In Britain


Ideally should be stored flat on level bearers. Can be stored upright against a wall (must not be uneven) with both stiles evenly supported but preferably, not for too long, Until gates are installed they should be handled carefully. Do not drag across each other or across surfaces.

Please note

Gates cannot be left exposed to the elements until fully treated, These gates have been produced at 16% moisture content and need to be kept dry. Avoid direct contact withsunlight until the gate has been fully treated

You may also like…


Go to Top