Stafford Driveway Gate

The Stafford is an impressive and imposing wooden driveway gate with tongue & groove match boarding which is ideal for security and privacy.


The Stafford driveway gate is not only impressive and imposing, but also offer great security and privacy with its tongue & groove match boarding. Furthermore, the gates are constructed with strong mortice & tenon joints and superior section sizes.

Additionally, the gates have a planed finish and a choice of stile tops, as well as water run-off features that encourage the water to run off and impede water ingress. These features help to extend the life of this quality gate. Made in Britain with joinery grade timber, these made to measure gates are can fit almost any driveway..

The gates are supplied treated with two coats of preservative. However, it’s important to note that all gates must be treated with a Modern UV wood oil prior to installation to maintain their quality.

Download our Easy Quote Form here and take to your nearest stockist.

  • Wood Type: Iroko and Softwood (click here for details).

  • Finish: Supplied untreated ready for treatment (click here for details)

  • Widths: Up to 9′ (2.74m) per gate.

  • Heights: Up to 8′ (2.44m) per gate.

  • Automation: Suitable for automation with the addition of a heavy duty rail (please consult a qualified installer).

  • Recommended Fittings: 30″ two way adjustable hinges + Ring latch + Drop bolt & socket set (both gates if a pair). Hinges should be a minimum of a  third of the width of the gate.

  • Recommended Posts: Click here for post sizes

  • Stile Tops: Choice of stile tops are available (click here for details).

  • Rebate: Closing edge of gate can be rebated.





Additional information


All sizes made to order

Special Widths

Available to order

Special Heights

Available to order


Gates must be hung with the bracing raising up from the bottom of the stile


As the width of a gate increase there will be a minimum height restriction to ensure that gate integrity is maintained. This allows the bracing to fully support the gate.


Joinery grade PEFC certified sustainable timber


Joinery grade Iroko sourced in line with EU Timber Regulation


Made In Britain


Ideally should be stored flat on level bearers. Can be stored upright against a wall (must not be uneven) with both stiles evenly supported but preferably, not for too long., Until gates are installed they should be handled carefully. Do not drag across each other or across surfaces.

Please note

Gates cannot be left exposed to the elements until fully treated, These gates have been produced at 16% moisture content and need to be kept dry. Avoid direct contact withsunlight until the gate has been fully treated

You may also like…


Go to Top