Swept Top Manor Driveway Gate

An impressive and imposing with tongue & groove match boarding which is ideal for security and privacy.

Description

The Swept Top Manor driveway gate is impressive and imposing with tongue & groove match boarding, which is ideal for security and privacy.

The gates are constructed using strong mortice & tenon joints with superior section sizes. The Swept Top Manor driveway gate has a planed finish, a choice of stile tops and water run-off features that encourage the water to run off as well as impeding water ingress. These made to measure gates are Made in Britain using joinery grade timber.

The softwood gates are supplied treated with two coats of preservative. All gates must be treated with a Modern UV wood oil prior to installation.

Download our Easy Quote Form here and take to your nearest stockist.

  • Wood Type: Iroko and Softwood(click here for details).

  • Finish: Supplied untreated ready for treatment (click here for details). Available in a fully treated coloured oil finish. Click here for details.

  • Widths: From 3′ (0.915m) up to 9′ (2.74m) per gate.

  • Heights: From 3′ (0.915m) up to 8′ (2.44m) per gate.

  • Automation: Suitable for automation with the addition of a heavy duty rail (please consult a qualified installer)

  • Recommended Fittings: 30″ two way adjustable hinges + Ring latch + Drop bolt & socket set (both gates if a pair). Hinges should be a minimum of a  third of the width of the gate. Click here for more information.

  • Recommended Posts: Click here for post sizes

  • Stile Tops: Choice of stile tops are available (click here for details)

  • Rebate: Closing edge of gate can be rebated.

 

 

 

 

Additional information

Availability

All sizes made to order

Special Widths

Available to order

Special Heights

Available to order

Hanging

Gates must be hung with the bracing raising up from the bottom of the stile

Bracing

As the width of a gate increase there will be a minimum height restriction to ensure that gate integrity is maintained. This allows the bracing to fully support the gate.

Softwood

Joinery grade PEFC certified sustainable timber

Hardwood

Joinery grade Iroko sourced in line with EU Timber Regulation

Manufacture

Made In Britain

Storage

Ideally should be stored flat on level bearers. Can be stored upright against a wall (must not be uneven) with both stiles evenly supported but preferably, not for too long., Until gates are installed they should be handled carefully. Do not drag across each other or across surfaces.

Please note

Gates cannot be left exposed to the elements until fully treated, These gates have been produced at 16% moisture content and need to be kept dry. Avoid direct contact withsunlight until the gate has been fully treated

You may also like…

Title

Go to Top