Town Side Gate

Made in Britain logoA quality tongue & groove side gate. 


The Town side gate is a quality tongue & groove gate. Framed, ledged and braced, with mortice and tenon joints and a planed finish.

  • Wood type: Softwood (click here for details).
  • Finish: Pressure treated (click here for details).
  • Width: 0.762,  0.9m, 1.067m &  1.2m  – Special widths made from to 0.762m up to 1.22m
  • Heights: 1.522m (only in width of 0.9m)  & 1.778m – Special heights made from 0.9m up to 2.1m
  • Automation: Not suitable for automation.
  • Recommended fittings: On Wall: Cranked pin on plate + Ring latch / Between posts: One way adjustable hinge + Ring latch. Click here for more information.
  • Recommended posts: 2.4m x 100mm x 100mm (minimum requirement).

Additional information


1.2m wide made to order, Held in stock

Special Widths

Available to order

Special Heights

Available to order


Can be hung from either stile but ideally should be hung so that the bracing supports the weight of the gate on the hinges


Joinery grade PEFC certified sustainable timber


Made In Britain


Ideally should be stored flat on level bearers. Can be stored upright against a wall (must not be uneven) with both sides evenly supported but preferably, not for too long

You may also like…

Go to Top