Wessex 5 Bar Gate

A superior quality heavy duty universal design gate with  4″ rails & braces.


New to the Charltons range, The Wessex 5 Bar gate has a heavy-duty universal design gate with two 4” x 3“stiles which allows it to be hung from either end.  The rails and braces are 4″ with rounded edges for a superior finish which allows water to run of the rails. Domed top bar, traditional mortice tenon joints and robust diamond bracing. Planed finish and stainless-steel fittings.  The Wessex makes for a substantial driveway gate.

Made in Britain, The Wessex 5 Bar gate is manufactured using sustainable slow grown softwood.

  • Wood Type: Softwood (click here for details)

  • Finish: Softwood is pressure treated (click here for details)

  • Widths: From 3′ (0.915m) to 14′ (4.27m). 13′ gates are made to order.

  • Height: 3’7” (1.09m) to top of top bar / 4’ (1.219m) to top of stile

  • Automation: Not suitable for automation.

  • Recommended Fittings: Adjustable Double Strap Field Gate Hinge Set (click here for sizes) + latch + Drop bolt & socket set (both gates if a pair). Click here for more information.

  • Recommended Posts: Click here for sizes.




Additional information

Special heights

Currently not available on this design


13' & 14' gates are made to oder


Can be hung from either stile, see https://charltonsgates.com/hanging-gates for more details


The number of diagonal braces will vary depending on the size of the gate


Joinery grade PEFC certified sustainable timber


Made In Britain


Until gates are installed they should be handled carefully. Do not drag across each other or across surfaces.
Ideally all gates should be stored under cover in an open sided building and out of direct sunlight. Should be stored flat on level bearers. Can be stored upright against a wall (must not be uneven) with both stiles evenly supported but preferably, not for too long.

You may also like…

Go to Top