Jump to: ↓ Downloads
SIDE GATES AND GARDEN GATES HUNG BETWEEN WALLS
Hanging a side gate or garden gate between walls is a key step in creating a secure and functional outdoor space. Correct installation is essential. A quality, well-made gate will only perform as intended if it is properly supported, aligned and fitted using the right hardware.
Gate hinge positions & gate fitting tolerances
Taller side gate hung between walls
Shorter garden gate hung between walls
Top view
A = Cranked band and hook pin on plate hinges *| B = Ring latch | C = Hanging stile
D = Fixing post | E = Tee Hinge * | F = Auto gate latch
Charltons Pedestrian Gate range are universally hung i.e., can be hung from either side. However, ideally on taller & heavier gates, hinges should be placed on the side with both braces in the corners (C) for maximum support of the gate.
* T hinges can be used but a third hinge is recommended on the middle brace for taller gates.
For heavier made to order pedestrian gates please refer to Driveway Gate instructions.
Measurements are based on the fittings supplied by Charltons and are intended as a guide. We recommend that gates are installed by an experienced professional.
A minimum of 50mm ground clearance should be allowed when hanging the gate.
Gate opening
In this position the gate opens inwards towards the property up to 180° (assuming no object in the way).
A gate should not open onto a public highway or pavement in accordance with the Highways Act 1980.
Gate hinge & fitting recommendations
Band & Hook Pin on Plate Hinge
Heavy duty Tee Hinge
Ring latch
Auto gate latch
Gate treatment
Pressure treatment provides protection against fungal decay and insect attack but does not prevent weathering caused by sunlight and moisture. The elements and UV rays will slowly degrade the effectiveness of the pressure treatment. We therefore recommend that all planed timber gates are treated with a modern UV-protection oil for planed timber such as Osmo (Softwood gates once they have thoroughly dried out).
For more information please visit our treatment pages HERE
PLEASE NOTE: Timber is a natural material and will expand, contract and move with changes in temperature and moisture levels. Minor twisting, bowing and surface cracking are normal characteristics of timber and do not affect the structural integrity of the gate.
Gate maintenance
Best practice: Re-check hinge adjustment and gate clearances several weeks after installation as timber and new posts may settle.
Manual installations should be supported by a regular maintenance regime. The time lapses between maintenance checks will be largely determined by the amount of usage the gate is expected to tolerate. A low usage situation would represent up to 50 operations a day; a low usage gates should be checked at least every 12 months. If there are any changes in the gate, for example, if the gate drags on the ground, this could be a sign that urgent attention required to avoid compromising the safety of the gate.
Challenging weather conditions, such as high winds/gales and heavy rain can cause damage to a gate and/or affect the foundations. Routine checks should always be made once the bad weather has subsided. The following should be checked:
- Review hinges and eyes for signs of excessive wear and tear e.g. damage, cracking
- Check the foundations for any signs of movement
- Look out for any indication that the material from which the gate has been crafted has in any way been compromised e.g. gates showing signs of excessive cracks
- Check that all ancillary equipment e.g., drop bolts and catches are working as expected. If any is classed as featuring in excess of 15% damage, a replacement should be considered.
Download
Other guides to download
